General DMA 6th Fuser Video Overlay Box HDMI/Display DMA Video Processor DMA Fusion Unit Box Computer Components

Description

The DICHEN Fusion 240Hz 6th Generation（THE LATEST VISION: BLUE COLOR）supports fusion and switching, with a maximum resolution of 3840x2160P at 60Hz. It is backward compatible with 2560x1440P at 144Hz, 1920x1080P at 240Hz, 3440x1440P at 100Hz, and 2560x1080P at 200Hz, among others.

Install instructions 

* Support various resolutions

* No need for complex settings and adjustments,plug and play!

* Lower latency than streaming and no lags

* Cooperate with DMA to assist in achieving perspective without losing the frame.

* Shipped from the original factory with warranty card

1K 240Hz/2K 144Hz DMA Video Overlay Box HDMI DMA Supreme Version Video Processor High Quality Computer Components.

Interfaces: (Please follow the instructions to connect the HDMI cable in order)

- HDMI output: to connect the main display

- HDMI1 host: to connect the host GPU

- HDMI2 secondary: to connect the secondary machine GPU

- Type-C: to upgrade program and inject EDID (only used during upgrades)

- DC 12V: power supply (default 12V 2A)

- Note: the host GPU cannot be directly connected to the main monitor with a DP or HDMI cable. If there is a connection, it must be unplugged.

Indicators:

- D1: Power indicator (always on for power on)

- D2: Fusion function on/off indicator light

- H2: HDMI2 secondary machine input signal indicator (always on: normal; off: no signal)

- H1: HDMI1 host input signal indicator (always on: normal; off: no signal)

Button Function:

- Power: power switch

- K1: short press for switching resolution in cycle (1920 x 1080; 2560 x 1440; 3840 x 2460; 2560 x 1080; 3440 x 1440)

- Note: long press and hold the K1 key for 3 seconds (hold until displayed): the current resolution and refresh rate are displayed in the upper left corner of the screen, with the host information on the top and the secondary information on the bottom.

- K2: short press for switching the upper layer image matting intensity with a total of 21 levels from 0 to 20. (default 0, level 0 also matting)

- K3: short press to restore the upper layer cutout strength to the factory default of 0.

- K4: Short press for switching the fusion function.

- Note: If you press the K4 key and the fusion light on, but there are no perspective fusion, there are two ways to solve this problem. One is to set the background color of the secondary unit to pure black; The second is to press the K2 key to enhance the RGB value.

• Display