iShoot Lens Collar Tripod Mount Ring Compatible with Nikon Nikkor Z 24-70mm f/2.8 S, AF-S 24-70mm f/2.8E ED VR; AF-S 24-70mm f/2.8G ED, Lens Support Holder Bracket with Arca Fit Quick Release Plate

iShoot Lens Bracket Combo IS-LINKER140 Work as Quick Release Plate or Clamp Separately or as Lens Collar Tripod Mount Ring Together for Landscape & Portrait Photography Installation Method: 1. Install IS-LINKER to IS-JZ140 from the reverse side first, and tighten with screws alternately; 2. Install QS-120 with bracket to IS-LINKER; the bracket can slide up and down, and the height can be adjusted according to the size of the lens; 3. Install quick release plate QS-60 to the camera bottom; 4. Fix the installed bracket on the tripod head, the bracket comes with dovetail grooves of RRS/ARCA-SWISS fit. Caution: I. The shortest length of the compatible lens cannot be less than 12cm (excluding the lens hood); the front end of the lens cannot be rotated, otherwise it will affect the use; II. The lens hood cannot be installed in reverse, and some lenses can only be used after removing the hood, otherwise the lens will be stuck. Compatible with Canon Lens: RF 15-35mm f/2.8L IS USM RF 24-70mm f/2.8L IS USM EF 16-35mm f/2.8L III USM EF 24-70mm f/2.8L USM (without hood) EF 24-70mm f/2.8L II USM EF 70-300mm f/4-5.6 IS USM EF 70-300mm f/4-5.6 IS II USM EF 75-300mm f/4.0-5.6 IS USM EF 75-300mm f/4.0-5.6 III USM EF 100-300mm f/4.5-5.6 USM Compatible with Nikon Nikkor Lens: Z 24-70mm f/2.8 S Z 24-120mm f/4 S Z 28-75mm f/2.8 AF-S 16-35mm f/4G ED VR AF-S 24-70mm f/2.8E ED VR AF-S 24-70mm f/2.8G ED AF-S 28-70mm f/2.8 ED-IF AF-P 70-300mm f/4.5-5.6E ED VR AF-S 70-300mm f/4.5-5.6G VR AF 180mm f/2.8D ED-IF Package Including: 1 x 2-in-1 Clamp & Quick Release Plate IS-JZ140 1 x Quick Release Plate QS-120 with Bracket 1 x Quick Release Plate QS-60 1 x Quick Release Plate Clamp Linker IS-LINKER 1. The lens collar support compatible with Canon Lens: RF 15-35mm f/2.8L IS USM; RF 24-70mm f/2.8L IS USM; EF 16-35mm f/2.8L III USM; EF 24-70mm f/2.8L USM (without hood); EF 24-70mm f/2.8L II USM; EF 70-300mm f/4-5.6 IS USM; EF 70-300mm f/4-5.6 IS II USM; EF 75-300mm f/4.0-5.6 IS USM; EF 75-300mm f/4.0-5.6 III USM; EF 100-300mm f/4.5-5.6 USM. 2. The tripod mount ring bracket compatible with Nikon Nikkor Lens: Z 24-70mm f/2.8 S; Z 24-120mm f/4 S; Z 28-75mm f/2.8; AF-S 16-35mm f/4G ED VR; AF-S 24-70mm f/2.8E ED VR; AF-S 24-70mm f/2.8G ED; AF-S 28-70mm f/2.8 ED-IF; AF-P 70-300mm f/4.5-5.6E ED VR; AF-S 70-300mm f/4.5-5.6G VR; AF 180mm f/2.8D ED-IF. 3. Caution: 1) The shortest length of the compatible lens cannot be less than 12cm (excluding the lens hood); the front end of the lens cannot be rotated, otherwise it will affect the use; 2) The lens hood cannot be installed in reverse, and some lenses can only be used after removing the hood, otherwise the lens will be stuck. 4. The whole set of DIY design consists of four parts: 1 x 2-in-1 Clamp & Quick Release Plate IS-JZ140, 1 x Quick Release Plate QS-120 with Bracket, 1 x Quick Release Plate QS-60, 1 x Quick Release Plate Clamp Linker IS-LINKER; which can be use separately as Quick Release Plate or Clamp and together as Lens Collar Tripod Mount Ring as well.

• 5. The assembly volume is about 20cm long, 9.5cm wide and 15cm high, and the weight is about 410g. The quick release plate adopts RRS/ARCA-SWISS structure, and the maximum load is about 5kg.