Package includes:
700 x Brass tube crimp beads
700 x Bead tips knot covers
350 x Open Half Round Crimp beads knot covers
350 x U Tube End Cord Bead Clamp Tips Wire guardians
Note:
Manual measurement, please allow slight errors on size.
The color may exist a slight difference due to different screen displays.
Little item included, please keep away from kids.
Wide Range of Applications
These crimp bead knot covers can be used to cover knots at the end of beaded necklaces or bracelets, in addition, they can be used with single rings, lobster clasps, bags, and other accessories. Crimp beads can be used as bead spacers to hold the main beads, such as glass beads or wooden beads, to make bracelets, earrings, necklaces, anklets, sweater chains, pendants, waist chains, eyeglass chains, key chains, etc. and DIY crafting.
- 2100pcs Set: you will get 700pcs brass tube crimp beads, 700pcs bead tip knot cap, 350pcs crimp bead knot cap and 350pcs brass wire guardian in silver,
- Brass Tube Crimp Beads: 0.06in/1.6mm and 0.08in/2mm in diameter each, they are used with all beading wires to ensure that the wires start and end. Thread through the crimp bead, around the clasp, through the crimp bead, and tighten the beading wire.
- Bead Tip Knot Covers: each 0.28in/7mm long, 0.16in/4mm wide, 0.06in/1.5mm hole diameter; used to cover the knot at the end of the strand or wire to attach to the grommet.
- Brass Open Crimp Bead knot Covers each 3mm/0.12in long, 2.5mm/0.1in wide, 1.3-1.5mm/0.05-0.06in hole diameter;, open on one side to allow them to slip over the crimp tube and can be mounted on the crimp bead or tube.
- Brass Wire Cable Protectors: each 0.18in/4.5mm long, 0.16in/4mm wide, 0.04in/1mm hole diameter, simply place your crimper on the tiger tail first, then feed your wire into the guardian on one side, then down through your crimper from the other side. Pull up your crimp and squeeze as usual.