When you get a flat tire, you'll want to have these travel-sized puncture patches ready! There are 6 self-adhesive patches and sandpaper to keep you going.presta (thin valve) and schrader (car valve) Suitable for inner tubes.
6x self adhesive patches (25mm)1x sandpaper How is it applied?
1.Try to keep the area free of dirt and debris throughout the entire Procedure.2. Sand the punctured area of the Inner Tube, then pump some air into the inner tube to shape it, but do not stretch it too much.3.To prevent too much air from escaping, hold a clean finger over the hole, peel off a patch and place it in the center of the puncture.4. Starting from the center, press firmly and work your way out to the sides.5.Repeat to ensure a strong bond is achieved.6.Reinstall the inner tube into your tire and inflate to the specified psi.